We know that many kinds of grinding machine, and the ceramic is one of the important material grinding machine. Also called ceramic mortar type grinding machine for grinding machine is common, a ceramic mortar type grinding machine is very simple, mainly composed of a grinding rod ceramic mortar and the two, so both of which is how to install? Ceramic grinding rod, ceramic pestle itself by supporting the use of a special screw, the grain hole screw is screwed into the ceramic pestle inner screw, proper tightening, also not too tight. Device of a rubber cushion, ceramic mortar is put on the pad of the central position, and then use the 3 screw straight up after the pressure ring presses in mortar and the fixing and pressing. Can also use the agate pestle, specific operation method and ceramic grinding rod is the same.
  Because the grinding rod installation are arranged in the machine on the swing arm, the swing arm is fixed and is output shaft in the grinding power head rod on the position, the position of a grinding rod power head is installed in a can move up and down the sliding seat, so that the screw can adjust the sliding seat, which can move up and down. In the grinding machine working, the grinding rod power head is fast turning up, and also as the grinding rod is rotated. We can determine the pestle and mortar positions according to the need to achieve the grinding effect, the tightness according to actual circumstances. If the location is determined, the operator moves the grinding rod in complete, but will mortar installed, then we should turn the handwheel to the grinding rod assembly stay the same height position, if necessary, can do position mark. The above is about ceramic mortar type grinding machine installation and adjustment.